Pave Greenish Blue Sapphire Ring 3.79 Ct., Platinum 950

The Natural Sapphire Company presents a ring built around a transparent 3.79 carat oval sapphire, precision cut to reveal a vivid bluish green hue. The sapphire measures 10.52 by 7.69 by 5.50 millimeters, and its proportions produce a depth of approximately 60.4 percent based on the average diameter, a balance that enhances color saturation without sacrificing return of light. The stone is a mixed brilliant cut, combining a brilliant facet arrangement on the crown with a carefully considered pavilion faceting scheme to intensify scintillation while preserving even color distribution. Clarity is graded eye clean evaluated at eye level, allowing unobstructed passage of light through the pavilion facets, and the polish is excellent, producing crisp facet junctions and mirror like facet planes. The stone has been heat treated, a standard and stable enhancement that optimizes tone and saturation, and its material origin from Australia contributes to the distinctive bluish green color that distinguishes this piece from corundums of other sources.

The faceting strategy used on this oval sapphire is deliberate, marrying brilliance and color optimization. The mixed brilliant cut employs a slightly reduced table facet relative to classic proportions, redirecting light into the crown and pavilion facet intersections to increase face up brilliance while maintaining saturation. The crown is cut with modified kite and star facets to generate a network of flash reflections, and the pavilion is faceted in a mixed layout that controls internal light paths so as to limit the prominence of a bow tie common to elongated ovals. The result is dynamic scintillation across the table and along the length of the oval, with even dispersion of color due to consistent pavilion angles and a carefully managed girdle thickness for structural integrity. The excellent polish status means facet junctions sit cleanly, and the eye clean clarity ensures these internal optical effects are presented without interference, allowing the vivid bluish green to read strongly whether viewed in daylight or incandescent light.

The setting architecture is engineered to make the sapphire visually dominant while maintaining secure mechanical support. The stone is mounted in a four claw prong setting that locates the prongs at the widest points of the oval, minimizing visual obstruction to the crown facets and exposing the pavilion to maximum ambient light. The prongs are tapered and burnished to smooth seats, their cross section optimized to resist deformation while presenting a minimal profile at the table edge. The under gallery is open and pierced to permit light entry from beneath and to facilitate cleaning, and the seat is cut to accommodate the sapphire girdle so the crown height sits balanced for both proportion and wear comfort. Shoulders are paved with natural white round diamonds totaling approximately 0.45 carats, each matched to F or G color and VS clarity, set in a micro pavé bead setting that creates a continuous ribbon of white brilliance. The pavé execution keeps the metal ridges between stones to a minimum for optical continuity, and the diamond sizes and spacing are calibrated to complement the sapphire scale without overpowering it.

The precious metal selection and finishing complete the optical equation that makes the sapphire pop. The ring is fabricated in 18K white gold, chosen for its combination of strength and its neutral white backdrop that enhances perceived color saturation of bluish green gemstones. The metalwork is hand polished to a high gloss, and internal surfaces are finished for comfort when worn. Proportions of the shank are kept slim at the shoulders to reduce visual mass, with measured reinforcement beneath the pavé section to protect against impact and wear. All joinery and prong shoulders are soldered and finished to a microscopic tolerance to prevent stress points, and the entire assembly is inspected for symmetry and facet alignment to ensure the face up presentation is centered and true. For collectors and connoisseurs who appreciate technical refinement, The Natural Sapphire Company offers this ring as an example of how controlled faceting, strategic light management through an open setting, and calibrated contrast from white diamonds and white gold work together to elevate the color and brilliance of a single remarkable Australian sapphire.